When the grout has partially cured, remove the excess from the joint at the floor with a utility knife and from the surface with a damp sponge. Sponge-clean the surface at least twice.

If you want to retile your bathroom floor, this comprehensive DIY guide will help you accomplish the intermediate-level task ...

Do not attempt to remove any of the grout or film with a metal scrapper or steel wool; you can permanently scar and damage the tile surface. Instead, use solid oak sticks that have crisp squared ...

If, by chance, the grout was an epoxy grout, you are toast. It is virtually impossible to remove excess epoxy grout from tile surfaces. The grout removal process requires just a few simple tools.

Once the excess grout is cleaned from the surface, it’s time to remove the grout haze. Do this by scrubbing the surface of the tile with the synthetic scouring pads.

Allow the tile to set, then apply the grout. Apply grout to the margins with a rubber float. Remove any excess grout while wet using a damp sponge. Note: The new grout will be clean and bright ...

Grouting tile is a task that handy DIYers can tackle in an afternoon. Learn the steps for how to grout—and get a list of all the gear you need for the job.

Fill all the openings. Using clean water and a sponge, go over the entire countertop to remove excess grout. You might also use a soft brush and wipe down again with clean water.

Dear James: Our house has a rather strange bathroom with some glossy and some dull ceramic tile. There is a lot of dark mildew on the grout. What is the best and safest method to clean the grout ...

12. Lay Tiles Press the tiles into the thinset. Push down firmly and wiggle back and forth to fully set the tile. If you can easily pull up the tile by prying with your fingers, the tile needs ...